Plastic Cascade Mini Ring With PP / PE/CPVC

Plastic Cascade Mini Ring:

It was developed by British Company MTL Ltd, which also called CMR. It has not only change traditonal equal length and diameter,but also cone-shaped flanging at one edge.This special structure has shorten distance which gas passing through wall’s out surface, but also reduced the resistance when air passing through bed layer and increased voidage.

Send email to us

Product Detail

Product Tags

Material

Our Factory assure all tower packing made from 100% Virgin Material.

Technical Data Sheet

Product Name			Plastic Cascade Mini Ring
Material			PP,PE,PVC,CPVC,PVDF ,etc
Life Span			>3 years
Size		Surface Area m2/m3	Void Volume %	Packing Number pieces/ m³	Packing Density Kg/m³	Dry Packing Factor m^-1
Inch	mm
1/2’’	168.91	370	85	299136	135.6	602.6
1”	2512.51.2	228	90	81500	65	312.8
1-1/2”	38191.2	132.5	91	27200	54	175.8
2”	50251.5	114.2	92.7	10740	43	143.1
3”	76372.6	90	92.9	3420	44	112.3
Feature		High void ratio, low pressure drop, low mass-transfer unit height, high flooding point, uniform gas-liquid contact, small specific gravity, high efficiency of mass transfer.
Advantage		Their special structure make it has big flux, low pressure drop, good anti-impaction capability. 2. Strong resistance to chemical corrosion, large void space. energy saving, low operation cost and easy to be load and unload.
Application		These various plastic tower packing are widely used in petroleum and chemical,alkali chloride,gas and environmental protection industries with max. temperature of 280°.

Physical & Chemical properties

Performace/Material	PE	PP	RPP	PVC	CPVC	PVDF
Density(g/cm3)(after injection molding)	0.98	0.96	1.2	1.7	1.8	1.8
Operation Temp.(℃)	90	＞100	＞120	＞60	＞90	＞150
ChemicalCorrosion resistance	GOOD	GOOD	GOOD	GOOD	GOOD	GOOD
Compression Strength(Mpa)	＞6.0	＞6.0	＞6.0	＞6.0	＞6.0	＞6.0