Plastic Super Intalox Saddle with PP/PE/CPVC

Plastic super intalox saddle is a combination of the ring and the saddle, which benefits the advantages of the two. This structure helps liquid distribution and enlarges the quantities of gas holes.The Intalox Saddle Ring has less resistance, bigger flux and higher efficiency than the Pall Ring. It is one of the most widely used packing with good hardness. It has low pressure, big flux and high efficiency of mass transfer, and it is easy to manipulate.

Send email to us

Product Detail

Product Tags

Technical Data Sheet

Product Name				Plastic Super Intalox Saddle
Material				PP/RPP/PVC/CPVC/PVDF,etc
Life Span				>3 years
Size Inch/mm		Surface Area m2/m3	Void Volume %	Packing Number pieces/ m³		Packing Density Kg/m³		Dry Packing Factor m^-1
1”	25×12.5×1.2	260	90		51200		92		390
1-1/2”	38×19×1.2	178	96		25200		75		201
2”	50×25×1.5	168	97		6300		76		184
3”	76×38×2.6	130	98		3700		64		138

Feature		High void ratio, low pressure drop, low mass-transfer unit height, high flooding point, uniform gas-liquid contact, small specific gravity, high efficiency of mass transfer.
Advantage		1. Their special structure make it has big flux, low pressure drop, good anti-impaction capability. 2. Strong resistance to chemical corrosion, large void space. energy saving, low operation cost and easy to be load and unload.
Application		These various plastic tower packing are widely used in petroleum and chemical,alkali chloride,gas and environmental protection industries with max. temperature of 280°.

Physical & Chemical properties

Plastic tower packing can be made from heat resistant and chemical corrosion resistant plastics, including polyethylene (PE), polypropylene (PP), reinforced polypropylene (RPP), polyvinyl chloride (PVC), chlorinated polyvinyl chloride (CPVC) ,polyvinyiidene fluoride (PVDF)and Polytetrafluoroethylene(PTFE) .The temperature in media ranges from -60 Degree C to 280 Degree C.

Performace/Material	PE	PP	RPP	PVC	CPVC	PVDF
Density(g/cm3) (after injection molding)	0.98	0.96	1.2	1.7	1.8	1.8
Operation Temp.(℃)	90	＞100	＞120	＞60	＞90	＞150
Chemical Corrosion resistance	GOOD	GOOD	GOOD	GOOD	GOOD	GOOD
Compression Strength(Mpa)	＞6.0	＞6.0	＞6.0	＞6.0	＞6.0	＞6.0